6-12mm automatic steel mesh production line

The parameters can be set in the welding process by using the advanced micro computer precision adjustment mode, and multiple discharges can be selected in the welding process

Control welding, single/multiple pulse or slow up discharge to reduce the impact of excessive welding current on the solder joint, to weld the spark

And the effect of splash is minimized.

2. Digital display and memory

Welding parameters are adjusted by LED tube to display data and status, which is stored in E digital mode. Data in EPROM memory will not be deviated and will be stored permanently.

3. Two-stage pneumatic operating system

The welding is pressurized with high and low pressure to prevent the welding head from being damaged by sudden downward pressure, and then welded with high pressure. This device enables the welding head to operate at low pressure, decrease in speed and improve efficiency, while minimizing the impact on the work.